Concrete Sealing
Our Premier Concrete Sealant
Driveways, Sidewalks, and More, We Seal it All
More than just a coating, Seal Now concrete sealant chemically reacts to concrete surfaces and develops an internal layer of protection. This new material that is created is neither a concrete material nor a sealant, but it has the best properties of both.
Our concrete sealant protects against such abrasives as acids, salts, and oils while providing permanent protection against pitting, corrosion, and deterioration. It also helps prevent water leakage, deterioration, and staining, increases concrete strength up to 23% – all backed by our 25 year warranty.
Long-Term Concrete Seal
You can protect your concrete floors, basements, and driveways with the Seal Now solution:
- Requires just a one-time application
- Is environmentally friendly
- Slows Weathering
- Seals, weatherproofs, hardens, and preserves most concrete surfaces
- Penetrates 0.5 to 1.5 inches deep in the concrete and forms an internal seal and water barrier
- Protects steel within the concrete from corrosion
- Uniformly cures, improves resistance to spot drying and hair checking
- Provides a prepared surface for better bonding of concrete toppings, adhesives, and paints
- Requires just a one-time application
- May be applied as soon as forms are removed from new concrete
- Eliminates water leakage
- Prevents dusting, pitting, and scaling due to salt
- Guards against stains (including oil)
- Increase concrete strength up to 23%
- Holds a hydrostatic head which significantly reduces dampness, mold, rutting, and dusting
- Can be applied from the inside of a structure
- Extends the life of paint, concrete toppings, and adhesives
- Slows oils, grease, acids, and salts from penetrating and breaking down the concrete
- Densifies and hardens concrete permanently
- Provides a nonslip surface
- Provides a nonslip surface
- Leaves a natural finish without a film or membrane
- Slows weathering
Services Include
FREE ESTIMATE – Initial walk through, measurements and estimate of areas to be cleaned and sealed.
Surface Wash
Professional pressure wash and surface cleaning to prepare concrete to be sealed.
*Some set-in stains and oils may not fully remove from wash. Additional cleaning additives and oil release may be needed. Ask representative about areas that may need additional attention.
Sealing
Seal Now will apply two separate coats of sealer to newly washed concrete. Washed and wet concrete helps to break the surface tension and helps sealer absorb into porous concrete. Sealer will continue to cure within concrete for 24 hours after application.
Clean Up
Seal Now will clean up and water rinse greenery, windows and doors that may have over-spray. Removal of masking plastic or any need masking materials used. Vehicles should stay off sealed areas for 24 hours. Seal now will caution tape off drive entrance upon completion of service.
Services include an initial walk-through and estimate of areas to be cleaned and sealed. Next comes a professional surface wash to prepare the surface to be sealed. Finally, Seal Now will apply the sealer to dry surfaces and mark off areas to dry before vehicle or foot traffic on sealed concrete.
